The shop will be away from 11 October to 26 October, but is still accepting orders. Please expect a delay in shipping; orders placed will be shipped immediately upon return.

Vintage (1934) British GPO Model 232 "Pyramid" Bakelite Rotary Telephone

$325.00

This is a vintage British GPO (General Post Office) 200-series "Pyramid" Bakelite rotary telephone, Model 232 & introduced in 1934. This phone (along with the Model 162) was a landmark in telecommunications design, marking Britain's transition from upright candlestick phones to modern one-piece handsets. This new era of handsets, introduced in 1929 as the Telephone No. 162 and upgraded in 1934 to the Telephone No. 232, was the UK's first standard telephone to combine the microphone and earpiece into a single cradle-mounted unit.

This type of phone would have been widely used in the Red Telephone Boxes (booths) seen all over the UK (as shown in the photos). Because the sloped pyramid body was too compact to hold a ringer, these phones had to be wired to a separate wall-mounted box (like a Bellset No. 25 or No. 26) that housed the bells and capacitor. Alternatively, the phone could be screwed directly on top of a matching Bakelite bellset base. The main difference between the earlier 162 and the later 232 is invisible from the outside. The 232 introduced an improved "ASTIC" (Anti-Sidetone Induction Coil) inside the phone body, which reduced the distracting echo of the speaker's own voice in the earpiece. Future models, ones prefixed with a 1/ (such as the 1/232, released in 1937) came with a small pull-out metal drawer at the bottom front designed to hold a personal directory card. The dial card in the center, the printed prefix 01-236 identifies a central London telephone number. The 236 exchange corresponds to CENtral (C-E-N on the dial), one of London's historic exchanges. The handwritten Extn. 739 and the instruction to "Dial 'O' for P.B.X." indicate this phone was used on a Private Branch Exchange—likely in a central London office, hotel, or government building—long after newer plastic phones had replaced it in most homes.

These phones can still be used today with a slight modification. Because these phones use pulse dialing (sending electrical clicks as the dial spins back) rather than modern touch-tone (DTMF) signals, they cannot dial out on most modern digital or VoIP lines without a small pulse-to-tone converter module installed inside. The base stamping (L11543E9) with SPECIAL reveals that this is a commercial/private-use variant of the pyramid telephone built by Automatic Telephone & Electric Co. (ATE / ATM) rather than a standard public-network General Post Office (GPO) unit. L Prefix = manufacturer (Standard phones built directly for the British GPO carried a three-digit model number (like 162 or 232. Model numbers beginning with the letter L are the commercial catalog numbers used by Automatic Telephone & Electric Co. (ATE) in Liverpool. Model Number L11543 is ATE's factory part number for their version of the 200-series pyramid desk telephone, sold for private internal systems. This phone would have been used in office PBX networks, railways, or overseas exports rather than standard residential GPO lines. The trailing letters and numbers (E9) indicate a factory revision, wiring variant, or production batch code used by ATE to track internal component configurations. The SPECIAL stamp indicates the phone was custom-wired or modified at the factory to meet specific non-standard requirements. Because the dial card shows an internal extension (Extn. 739) and PBX instructions, it was likely custom-configured for a specific private switchboard system in London.